Siemens SCALANCE W760 - Page 323

Network protocols
7.4 SNMP
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
323
Parameter
Description
Range of values / note
security-model
Specifies whether the security settings
are used according to SNMP version 1,
2c or 3
Keyword
• v1
•
v2c
•
v3
Authentication Authentication and encryption setting
for v3
•
auth
•
noauth
•
priv
message-processing
Specifies whether the processing of the
messages is according to SNMP ver-
sion 1, 2c or 3
Keyword
• v1
•
v2c
•
v3
Storage type specifies whether the settings remain
following a restart:
•
volatile (volatile):
The settings are lost after a
restart
•
nonvolatile (non-volatile):
The settings are retained after
a restart
Keywords need to be specified.
If optional parameters are not specified when configuring, the default values apply.
Result
The SNMP target parameters are configured.
Further notes
You delete the SNMP target parameters with the no snmp targetparams command.
You display settings of this function with the
show snmp targetparam command.
You configure the user profile with the
snmp user command.
You configure a filter with the
snmp filterprofile command.
You display the list of users with the
show snmp user command.