EasyManua.ls Logo

Siemens SCALANCE W786-2 SFP - Page 277

Siemens SCALANCE W786-2 SFP
456 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Configuring with Web Based Management
6.6 "Interfaces" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13
277
size after they have been received. This can be beneficial if the transmission quality is
poor because larger packets are more difficult to transmit. However fragmentation into
smaller packets means a poorer throughput.
Note
You can only edit this value if the
you have set the transmission standard "802.11g" (2.4
GHz) or "802.11 a" (5 GHz), see "WLAN Mode" in "Interfaces > WLAN > Basic".
HW Retries
Specify the number of hardware retries. The hardware repetition is performed by the
WLAN chip itself when it tries to repeat an unacknowledged packet immediately.
If all hardware repetitions were unsuccessful, the packet is deleted.

Table of Contents

Other manuals for Siemens SCALANCE W786-2 SFP

Related product manuals