5.4 Wall mounting
Wall mounting
1. For wall mounting, use suitable mounting fittings for the wall
(for example, for a concrete wall, four plugs 6 mm diameter and 30 mm long, 4 screws 3.5
mm diameter and 40 mm long).
2. Connect the electrical cable connecting cables.
3. Fit the connectors for the signaling contact.
4. Insert the terminal blocks into the sockets on the IE Switch X-300.
Note
For more exact dimensions, please refer to the section "Dimension drawings".
Note
The wall mounting must be capable of supporting at least four times the weight of the
IE Switch X-300.
Note
For wall mounting of a rack device (R), use suitable fittings and mount the device as shown
in the drawing.
Assembling
5.4 Wall mounting
SCALANCE X-300
Compact Operating Instructions, 11/2019, A5E00982643-18 47
To Next Page
Loading...
Need help?
General