Siemens Industry, Inc. 45 A6V12198161_en--_a
Smart Infrastructure
9.3.3 Update a Switch
To update a switch, follow these steps:
1. Select the switch you want to update from the Fiber Optic Switch List window.
2. Click Edit or double-click the selected switch on the list.
3. An update window displays as shown in Figure 9-11 except that the address field
is disabled.
4. You can update the IP address and/or the Ring Redundant Manager setting.
5. Click Update to complete the changes or click Cancel to leave the settings as
they were.
Figure 9–11: Updating A Fiber Optic Switch
To Next Page
Loading...
