Approvals, certificates, standards
9.7 Product group XR-300M PoE
SCALANCE X-300
Operating Instructions, 02/2012, A5E01113043-12
261
Machinery directive
The product is a component in compliance with the EC Machinery Directive 2006/42//EEC.
According to the machinery directive, we are obliged to point out that the product described
is intended solely for installation in a machine.
Before the final product can be put into operation, it must be tested to ensure that it conforms
with the directive 2006/42/EEC.
Note
Note for the manufacturers of machines
This product is not a machine in the sense of the EC Machinery Directive. There is therefore
no declaration of conformity relating to the EC Machinery Directive 2006/42/EEC for this
product.
FM approval
All variants of the XR-300M EEC with 24 VDC power supply meet the requirements of the
standards
● Factory Mutual Approval Standard Class Number 3611
● FM Hazardous (Classified) Location Electrical Equipment:
Non Incendive / Class I / Division 2 / Groups A,B,C,D / T4 and
Non Incendive / Class I / Zone 2 / Group IIC / T4
Notice for Australia
The product meets the requirements of the AS/NZS 2064 standard (Class A).
cULus Approval for Information Technology Equipment
All variants of the XR-300M PoE with 24 VDC power supply meet the requirements
Underwriters Laboratories (UL) complying with:
● Standard UL 60950-1
● CSA C22.2 No. 60950-1-03
Report Number E115352
To Next Page
Loading...
Need help?
General
