Siemens SENTRON 7KM PAC2200 - Applying the Measuring Voltage; Parameterizing the Device; Parameterizing with Powerconfig

Commissioning
6.2 Applying the measuring voltage
PAC2200
64 Equipment Manual, 12/2019, L1V30415167B-03
6.2 Applying the measuring voltage
The device is supplied with power via the measuring voltage.
Please consult the technical data or the type plate for the type and level of the possible
supply voltage.
Note chapter Connections (Page 44)
WARNING
Do not apply voltage in excess of the rated voltage limit
Can cause death, serious personal injury, or equipment damage.
The maximum voltage listed in the technical data and on the rating plate must not be
exceeded.
6.3 Parameterizing the device
6.3.1 Parameterizing with powerconfig
You can download the powerconfig configuration software from the Industry Online Support
Website (
https://support.industry.siemens.com/cs/document/63452759/update-version-
powerconfig-v3-7?dti=0&lc=en-WW).
Information and notes on how to use powerconfig can be found in the Online Help of the
configuration software or by contacting Technical Support.
You launch the Online Help in powerconfig by pressing the "F1" key.
In order to be able to configure the PAC2200 measuring device, measuring voltage must be
connected and communication to the device established.