Technical specifications
10.3 5SL6 COM miniature circuit breaker
Circuit protection devices with communication and metering function
90 System Manual, 06/2021, L1V30827018B-01
Supply voltage frequency rated value
Between 1 ... 5.7 W depending on rated current and charac-
teristics
Power loss [W] a rated value current with AC at warm oper-
ating condition per pole
Between 0.9 ... 4.6 W depending on rated current and char-
acteristics
Power loss [W] on N-pole at rated current at AC during oper-
ation
Between 0.02 ... 0.9 W depending on rated current and
characteristics
Vibration resistance according to IEC 60068-2-6
Product features touch protection
Position of network connection cable
Electrical endurance (operating cycles) at AC load on average
Typical mechanical endurance (operating cycles)
Product feature silicone-free
Product feature halogen-free
Suitability for use amperemeter
Suitability for use reactive power meter
Suitability for use frequency meter
Suitability for use voltmeter
Suitability for use active power meter
Standard for environmental testing sinusoidal vibrations
IP degree of protection, at rear
IP degree of protection, on the front
Reference condition for measuring accuracy
in accordance with IEC 61557-12, IEC 62053-22 and
IEC 62053-23
Formula for relative total measurement inaccuracy for
measured variable power factor
Formula for relative total measurement inaccuracy for
measured variable power
Formula for relative total measurement inaccuracy for
measured variable voltage
Formula for relative total measurement inaccuracy for
measured variable active power
Formula for relative total measurement inaccuracy for
measured variable reactive power
Measuring method for current measurement
Measuring method for voltage measurement
Maximum measurable mains voltage between N and L
Minimum measurable mains voltage between N and L
Measurable line frequency final value
To Next Page
Loading...
