Siemens Sentron 7KN POWERCENTER 1000

To Next Page

To Previous Page

Technical specifications

10.4 5SV6 COM arc fault detection device

Circuit protection devices with communication and metering function

92 System Manual, 06/2021, L1V30827018B-01

Designation

Value

Minimum connectable conductor cross-section, finely

stranded with end sleeve

0.75 mm

Minimum tightening torque

1.2 N.m

Maximum tightening torque

2 N.m

Pollution degree

Minimum ambient temperature during storage

-40°C

Maximum ambient temperature during storage

75°C

Maximum ambient temperature during operation

45°C

Minimum ambient temperature during operation

-25°C

Ambient temperature with 95% relative air humidity

55°C

Number of test cycles for environmental testing in accord-

ance with IEC 60068-2-30

Product feature silicone-free

Yes

Product feature halogen-free

Yes

Minimum tripping current at arcs serial to load

2 A

Maximum tripping current at arcs serial to load

Operating current

Minimum tripping current at arcs parallel to load

50 A

Maximum tripping current at arcs parallel to load

500 A

Mounting position

Any

Mounting depth

70 mm

Height

90 mm

Width

18 mm

Depth

68.5 mm

Net weight

120 g

Suitability for use amperemeter

Yes

Suitability for use reactive power meter

Yes

Suitability for use frequency meter

Yes

Suitability for use voltmeter

Yes

Suitability for use active power meter

Yes

Standard for shock

IEC 61373

Standard for environmental testing sinusoidal vibrations

IEC 60068-2-6

IP degree of protection, at rear

IP20

IP degree of protection, on the front

IP40

Reference condition for measuring accuracy

in accordance with IEC 61557-12, IEC 62053-22 and

IEC 62053-23