Siemens Sentron 7KN POWERCENTER 1000 - Page 96

Technical specifications
10.5 3NA COM fuse
Circuit protection devices with communication and metering function
94 System Manual, 06/2021, L1V30827018B-01
Designation
Value
Power supply
CT Harvesting
Reference ID in accordance with DIN EN 61346-2
F
Reference ID in accordance with IEC 81346-2:2009
F
Design of the indicator
Front indicator
Mounting type
Non-insulated grip lugs
Design of the switching contact
Non-corroding, silver-plated
Mounting position
Any, preferably vertical
Height
149 mm
Width
60 mm
Depth
72 mm
Net weight
710 g (with electronic module) or 540 g (without electronic
module)
European standards
RED Safety
EN 60669-2-5
RED Health
EN 62479
RED EMC or electrical safety
EN 63044-3 /-5-3, EN 301489-17, EN 300480-17
RED Radio Spec
EN 300 328
International standards
for EMC for industrial fields
EN 63 044-5-3/IEC 61000-6-2
for EMC against power frequency magnetic field
IEC 61000-4-8
for EMC against voltage dips and voltage interruptions
IEC 61000-4-11
for EMC against conducted interferences through HF fields
IEC 61000-4-6
for EMC against voltage surges
IEC 61000-4-5
for EMC against fast transient electrical disturbance variables
IEC 61000-4-4
for EMC against high frequency fields
IEC 61000-4-3
for EMC against discharge
IEC 61000-4-2
for free falling
IEC 60068-2-32
for continuous shocks
IEC 60068-2-29
for shocks
IEC 60068-2-27
for environmental testing sinusoidal vibrations
IEC 60068-2-6
for environmental testing damp heat, cyclic
IEC 60068-2-30
for environmental testing dry heat
IEC 60068-2-2
for environmental testing cold
IEC 60068-2-1
Approvals
VDE, KEMA KEUR