Parameterizing
7.2 Parameterizing via the operator interface
PAC1020
50 Equipment Manual, 05/2020, L1V30610008B-01
7.2 Parameterizing via the operator interface
The power monitoring device can be parameterized via the "SETTINGS" menu option.
You can find more information in chapter Menu-based navigation (Page 45).
The device settings are arranged into the following groups. The "SETTINGS" menu shows the
choice of groups:
• DEVICE INFO
Article number and versions
• LANGUAGE
Language of the display
• BASIC PARAMETERS
Settings for the measuring inputs
• INTEGRATED I/O
Settings for using the status display of the digital inputs and outputs
• COMMUNICATION
Settings for network communication
• DISPLAY
Settings for the display
• ENERGY COUNTER
Parameterization of the energy counters
• ADVANCED
Password protection, resetting the device
To Next Page
Loading...
