Siemens SENTRON PAC1020 - Advanced

Parameterizing
7.2 Parameterizing via the operator interface
PAC1020
Equipment Manual, 05/2020, L1V30610008B-01
51
7.2.1 Device information
The device information cannot be modified.
Device information
7KM1020-0BA01-1DA0
Article number of the device
PAC1020 Vx.x.x
Device designation and firmware version
D/T: xxxxxx
Date code
ES: xxx
Hardware revision level
FW: xxxx
Firmware revision level
BL: xxxx
Boot loader revision level
7.2.2 Language
The language of the menu-based operation and the measured value displays can be set in the
"LANGUAGE" menu item.
Selection Range Factory
setting
Language
• English
• Portuguese
• Spanish
• Chinese
English