Siemens SENTRON PAC1020 - Password Policy

Parameterizing
7.2 Parameterizing via the operator interface
PAC1020
Equipment Manual, 05/2020, L1V30610008B-01
55
Selection Range Factory
setting
PER
(with PULSE only)
Value of the cumulated power for which a config-
urable number of pulses is output. The number of
pulses to be output is defined in the field "PER".
• 1
• 10
• 100
• 1000
1
PULSE LENGTH
(with PULSE only)
Length of the pulse:
30 … 500 ms
The minimum length of the pulse pause corre-
sponds to the pulse duration specified.
100 ms
Status
Selection Range Factory
setting
DI 0.0
DO 0.0
Graphically represents the status of the integrated
I/Os on the device display.
–
7.2.5