Siemens SENTRON PAC2200 - Page 80

Technical data
8.1 Technical data
PAC2200
78 Manual, 05/2018, L1V30415167B-02
Digital output
Digital output
Number
1
Type
Passive
Design/function
Switching output or pulse output
Maximum switching voltage
30 V
Output current
For signal "1" Depends on the load and the external power
supply
Continuous load
≤50 mA (thermal overload protection)
Transient overload
≤130 mA for 100 ms
For signal "0"
≤0.2 mA
Internal resistance
30 Ω
Overvoltage category
CAT I
Pulse output function
Standard for pulse emitter Signal characteristics in accordance with
IEC 62053-31
Adjustable pulse duration
30 … 500 ms
Min. settable time frame
10 ms
Max. switching frequency
17 Hz
Short-circuit protection
Yes
Communication
Ethernet interface (optional)
Protocols
Modbus TCP; web server (HTTP); SNTP; DHCP
Ethernet connection
RJ-45
Data rate
10 / 100 Mbit/s
M-BUS interface (optional)
Protocol M-BUS
Connection 2-pole
Baud rate: 1200/2400/4800/9600
RS 485 interface (optional)
Protocol
MODBUS RTU
Connection
3-pole
Baud rate
4800/9600/19200/38400
Format
8N1/8N2/8E1/8O1/