Operator control
8.1 Device interface
SENTRON PAC3200
112 Manual, 02/2008, A5E01168664B-04
Designation of the measured value property
The second position in the display title contains the currently displayed measured value
property. The table below lists the measured value properties and their designations:
Designation of the measured value property Measured value property of the measured
variable
INSTANTANEOUS Measured instantaneous value
MAXIMUM Measured maximum value
MINIMUM Measured minimum value
AVERAGE Calculated average value
IMPORT Import of energy/positive energy
EXPORT Export of energy/negative energy
Function keys
The function keys have multiple assignments in the measured value display. F2 and
F3
are only available when the instantaneous value is displayed.
Key function F1 F2 F3 F4
Display the instantaneous value
Display the maximum value
Display the minimum value
Display the average value
Display import of energy/positive energy
Display export of energy/negative energy
Reset the maximum/minimum or average
value to the instantaneous value
Scroll up in the selection list
Scroll down in the selection list
Go to the menu selection
See also
Operator input steps in the "MAIN MENU" (Page 119)
To Next Page
Loading...
