Siemens SENTRON PAC3200 - 9.2 Parameterizing the operator interface

Parameterize
9.2 Parameterizing the operator interface
SENTRON PAC3200
128 Manual, 02/2008, A5E01168664B-04
9.2 Parameterizing the operator interface
9.2.1 Groups of settings
The device settings are arranged into the following groups. The "SETTINGS" menu shows
the choice of groups:
● Device information
● Language/Regional
● Basic parameters
● Power demand
● Integrated I/O
● Communication
● Display
● Advanced
● PROFIBUS module (only if the optional PAC PROFIBUS DP expansion module is
plugged in)
Figure 9-1 "Settings" menu