Siemens SENTRON PAC3200 - Page 129

Parameterize
9.2 Parameterizing the operator interface
SENTRON PAC3200
Manual, 02/2008, A5E01168664B-04
129
Overview - Menu tree and device settings
Below is the menu tree of the "SETTINGS" menu with all the device settings The tree
branches into multiple submenus.
MAIN MENU
SETTINGS
DEVICE INFORMATION 21.1
Manufacturer designation
Order No.
Serial number
Date code
Hardware revision level
Firmware revision level
Boot loader revision level
LANGUAGE/REGIONAL 21.2
LANGUAGE
PHASE LABELS
BASIC PARAMETERS 21.3
VOLTAGE INPUTS 23.0
CONNECTION TYPE
Use PTs?
VOLTAGE INPUT
PT PRIMARY
PT SECONDARY
CURRENT INPUTS 23.1
CT PRIMARY
CT SECONDARY
INVERT CT POLARITY
POWER DEMAND 21.4
TIME INTERVAL
SYNC. VIA BUS
SYNC. VIA DIG.INPUT
INTEGRATED I/O 24.0
DIGITAL OUTPUT 24.0
ACTION
SOURCE
PULSES PER UNIT
PULSE LENGTH
DIGITAL INPUT 24.1
ACTION
PULSES PER UNIT
UNIT