Siemens SENTRON PAC3200 - Language, Regional Settings

Parameterize
9.2 Parameterizing the operator interface
SENTRON PAC3200
132 Manual, 02/2008, A5E01168664B-04
Device information
SIEMENS AG Manufacturer designation.
<Order no.> Order number of the device.
S/N: Serial number of the device.
D/T: Date code.
HW-REV: Hardware revision level.
SW-REV: Firmware revision level.
BL-REV: Boot loader revision level.
9.2.3 Language, regional settings
Adapting the regional and language options.
Call: "SETTINGS > ANGUAGE/REGIONAL"
Figure 9-3 "LANGUAGE SETTING" device setting
Language and regional settings
LANGUAGE Language of the display.
Range: German, English, Portuguese, Turkish,
Spanish, Italian, French, Chinese,
Russian
Default: English
PHASE LABELS Designation of the phases on the display.
Range:
L1 L2 L3,
a b c
Default:
L1 L2 L3