Siemens SENTRON PAC3200 - Page 138

Parameterize
9.2 Parameterizing the operator interface
SENTRON PAC3200
138 Manual, 02/2008, A5E01168664B-04
ENERGY PULSE: The digital output outputs the
parameterized number of pulses per
energy unit (e.g. kWh). The energy counter
specified in the field "DIGITAL OUTPUT >
SOURCE" is evaluated here.
Default: OFF.
SOURCE The field is available in the case of the actions "LIM.VIOLATION" and
"ENERGY PULSE"
Figure 9-10 "DIGITAL OUTPUT" device setting
In the case of the action "LIM.VIOLATION":
the field "SOURCE" selects the limit whose status is given at the digital
output.
LIMIT LOGIC
LIMIT 0
LIMIT 1
LIMIT 2
LIMIT 3
LIMIT 4
LIMIT 5
Default: LIMIT LOGIC.
In the case of the action "ENERGY PULSE":
the field "SOURCE" selects the type of cumulative power and the
import value that triggers the pulse when that value is reached.
kWh IMPORT
kWh EXPORT
kvarh IMPORT
kvarh EXPORT
The subdivision of the import value is defined in the field "DIGITAL
OUTPUT > PULSES PER UNIT".
PULSES PER
UNIT
The field is available with the action "ENERGY PULSE".
Number of pulses per unit. The unit is defined in the field "DIGITAL
OUTPUT > SOURCE".
Range: 1 to 999
Default: 1