Parameterize
9.2 Parameterizing the operator interface
SENTRON PAC3200
Manual, 02/2008, A5E01168664B-04
147
LIMIT LOGIC
Figure 9-22 "LIMIT LOGIC" device settings
(1) Logic operator
(2) Limit designation
(3) Monitored data source
(4) Limit currently violated:
Yes, No
LIM0, LIM1, ..., LIM5 Logic operator
Range: "----", AND, OR.
The value "----" means: not activated.
Default: "----"
You can find information on generating the logically
combined limit "LIMIT LOGIC" in the Limits chapter.
UNIVERSAL COUNTER
Configurable universal counter for counting limit violations and status changes at the digital
input or output, or for indicating the active power or reactive power of a connected pulse
encoder, e.g. S0 interface.
SOURCE Source of the count.
Range:
DIG. INPUT,
DIG. OUTPUT,
LIMIT LOGIC,
LIMIT 0,
LIMIT 1,
LIMIT 2,
LIMIT 3,
LIMIT 4,
LIMIT 5
To Next Page
Loading...
