Technical data
11.1 Technical data
SENTRON PAC3200
162 Manual, 02/2008, A5E01168664B-04
Screw terminal
Connection designations , DI-, DI+, DO-, DO+
Solid 1 x 0.2 ... 2.5 mm²
2 x 0.2 ... 1.0 mm²
Finely stranded without end
sleeve
1 x 0.2 ... 2.5 mm²
2 x 0.2 ... 1,5 mm²
Single-core with end sleeve,
without plastic sleeve
1 x 0,25 ... 2.5 mm²
2 x 0,25 ... 1.0 mm²
Single-core with end sleeve, with
plastic sleeve
1 x 0.25 ... 2.5 mm²
Single-core with TWIN end
sleeve, with plastic sleeve
2 x 0,5 ... 1,5 mm²
AWG cables 1 x 24 ... 12
Stripping length 7 mm
Connection screws
Tightening torque min. 0.5 Nm
Tool Screwdriver PZ1
cal. ISO 6789
Crimping tool in accordance with EN 60947-1
RJ45 connector
Enclosure
Housing design Switching panel housing to IEC 61554
Housing dimensions W x H x D 96 mm x 96 mm x 51 mm
Overall depth 51 mm
Permissible thickness of the switching panel for
installation
max. 4 mm
Weight
Power Monitoring Device Approximately 325 g
includes packaging Approximately 460 g
Mounting position The mounting position is vertical
Protection Class Protection class II when installed.
Degree of protection according to IEC 60529
Front IP65
Rear Device with screw
terminal
IP20, NEMA 1A
Device with ring lug
terminal
IP10
If higher degree of protection requirements are
placed on the application engineering, the
customer must take suitable measures
To Next Page
Loading...
