Siemens SENTRON PAC3200 - Table 3-24 I&M 1-4 Parameters with the Function Codes 0 X03, 0 X04 and 0 X10; Table 3-25 I&M 0 Parameter of the Module in Slot 1 with the Function Codes 0 X03 and 0 X04

Description
3.9 Ethernet port
SENTRON PAC3200
60 Manual, 02/2008, A5E01168664B-04
Table 3-24 I&M 1-4 parameters with the function codes 0x03, 0x04 and 0x10
Offset Total
registers
Number of
registers per
parameter
Name Format Value range
from ... to
Access
Start offset
64028
[16] Plant identifier Char 32 ASCII RW
[64044] [11] Location identifier Char 22 ASCII RW
[64055] [8] Installation date Char 16 ASCII RW
[64063] [27] Comment Char 54 ASCII RW
[64090]
89
[27] Signature Char 54 - RW
Table 3-25 I&M 0 parameter of the module in slot 1 with the function codes 0x03 and 0x04
Offset Total
registers
Number of
registers per
parameter
Name Format Value range
from ... to
Access
Start offset
64117
[1] Manufacturer's ID unsigned short 0 ... 65535
Standard: 42
*)
R
[64118] [10] Order No. Char 20 ASCII R
[64128] [8] Serial number Char 16 ASCII R
[64136] [1] Hardware version unsigned short 0 ... 65535 R
[64137] [2] Firmware version 1 char, 3 unsigned
char
V 0.0.0 ...
V 255.255.255
R
[64139] [1] Counter for changes unsigned short 1 ... 65535 R
[64140] [1] Profile ID unsigned short 3A00 ... F6FF R
[64141] [1] Specific Profile ID unsigned short - R
[64142] [1] Version of the I&M data 2 unsigned char 0.0 ... 255.255 R
[64143]
27
[1] Supported I&M data unsigned short 00 ... FF R
*) 42 stands for Siemens AG
See also
Modbus measured variables with the function codes 0x03 and 0x04 (Page 40)