SENTRON PAC4200
Manual, 09/2008, A5E02316180B-01
119
Parameterizing
9
9.1 Introduction
Device settings
The "Parameterization" chapter describes the device settings. These functions include:
● Adjustment to the physical conditions of use
● Integration into the communication system
● Country-specific settings, ergonomics, device protection
It is possible to set the device by means of:
● The operator interface of the device
● Configuration software
Note
Protection of the device settings
As delivered, the device settings are not protected. At startup, a password should be
assigned and the device protection activated to guard against unauthorized or inadvertent
changes.
9.2 Parameterizing the operator interface
9.2.1 Groups of settings
The device settings are arranged into the following groups. The "SETTINGS" menu shows
the choice of groups:
● Device information
Order number and versions.
● Language/Regional
Display language and designation of the phases on the display.
● Basic parameters
Settings for the measuring inputs, averaging time of the sliding window demand.
● Power demand
Settings for the load profile.
To Next Page
Loading...
