Parameterizing
9.2 Parameterizing the operator interface
SENTRON PAC4200
126 Manual, 09/2008, A5E02316180B-01
9.2.6 Date / time
Device settings relating to the date and time.
Call: "SETTINGS > DATE/TIME"
Figure 9-5 "DATE/TIME" device settings
DATE/TIME
DATE Current date.
The date format is defined in the FORMAT field.
FORMAT Date format.
Range: DD.MM.YYYY, YYYY-MM-DD, MM/DD/YY
Default value: DD.MM.YYYY
TIME Time format: HH:MM:SS
TIME ZONE Time zone, refers to coordinated universal time (UTC).
Examples:
"-06:00" corresponds to UTC-6
"+01:00" corresponds to UTC+1
Range: -12:00 ... +14:00,
settable in 30 minute steps.
Default value: 00:00
DAYLIGHTSAVING Automatic change of time from standard time to daylight saving
time and from daylight saving time to standard time.
Range:
OFF Time change is switched off.
AUTO EU Time change within the European Union
Changeover to daylight saving time: The
internal clock is put forward from 1 a.m.
UTC to 2 a.m. UTC on the last Sunday in
March.
Changeover to standard time: The
internal clock is put back from 2 a.m.
UTC to 1 a.m. UTC on the last Sunday in
October.
To Next Page
Loading...
