Description
3.16 Events
SENTRON PAC4200
54 Manual, 09/2008, A5E02316180B-01
Event Event
class
Standard
warning
level
Reason Remedy
UNIV.=0 Control Information The universal counter has been
reset.
Value 00000000
Slot xx interface
-
PASSWORD Control Information Password protection is activated.
Slot xx interface
-
PASSWORD Control Information The password has been
changed
Slot xx interface
-
FIRMWARE Control Information The firmware has been updated.
Version PAC4200 Vx.xx
Slot xx interface
-
1) Counter = active energy import tariff 1 / 2 kWh, reactive energy export tariff 1 / 2 kVAh, apparent energy tariff 1 / 2 kVAh
Acknowledging an event
If an event is set to "acknowledgable" in the software, a popup window for this event opens
on the device. Acknowledge the event in the popup window with "OK". The popup window is
closed as a result of the acknowledgment and the event is logged in the event memory.
Settings in the SENTRON software
You can make the following settings in the software:
● Change the warning level for an event
● Acknowledge an event
● Entry of an event in the event memory
● Output of the event at the digital output
● Order of appearance on the display
See also
Safety instructions (Page 15)
Technical support (Page 12)
To Next Page
Loading...
