SENTRON PAC4200
Manual, 09/2008, A5E02316180B-01
57
Installation
5
5.1 Unpacking
Observe the ESD Guidelines. Open the packaging carefully. Do not use excessive force.
Check the packaging
Carry out the following checks after receipt of the device and before installation:
● Ensure the packaging is undamaged.
● Make sure that the contents of the package are complete.
● Check the device for external damage.
Please contact your Siemens sales partner in the following cases:
● The packaging is damaged
● The contents of the package are not complete
● The device is damaged.
WARNING
Damaged devices
Damaged devices may show signs of safety defects. They can result in serious injury
and property damage.
Do not install or start up damaged devices.
Storage
Store the SENTRON PAC4200 in dry conditions.
NOTICE
Avoid condensation
Sudden fluctuations in temperature can lead to condensation. Condensation can affect the
function of the device. Store the device in the operating room for at least 2 hours before
commencing installation.
To Next Page
Loading...
