41
Overhaul
Table 7 – Critical Fasteners and Torque Limits
SSttaattiioonnaarryy CCoonnttaacctt MMoovvaabbllee CCoonnttaacctt IInntteerrrruupptteerr CCllaammpp
TTuubbee FFaammiillyy
SSiizzee TToorrqquuee SSiizzee TToorrqquuee SSiizzee
TToorrqquuee
AAllll C
Cuurrrreenntt RRaattiinnggss 11220000 22000000 && 33000000
VS12015 M12 x 1.75 60-65 ft-lbs. M10 x 1.5 15-20 ft-lbs. 1-3/8-16 2-3/8-16 26-36 ft-lbs.
VS25002 M12 x 1.75 60-65 ft-lbs. M20 x 1.5 15-20 ft-lbs. 1-3/8-16 2-3/8-16 26-36 ft-lbs.
VS17006 M12 x 1.75 60-65 ft-lbs. M20 x 1.5 15-20 ft-lbs. 1-3/8-16 2-3/8-16 26-36 ft-lbs.
VS10006 M16 x 2 60-65 ft-lbs. M12 x 1.75 30-35 ft-lbs. 1-3/8-16 2-3/8-16 26-36 ft-lbs.
VS10028 M16 x 2 60-65 ft-lbs. M12 x 1.75 30-35 ft-lbs. 1-3/8-16 2-3/8-16 26-36 ft-lbs.
VS15050 M16 x 2 60-65 ft-lbs. M12 x 1.75 30-35 ft-lbs. 1-3/8-16 2-3/8-16 26-36 ft-lbs.
OOppeenn EEnndd oorr BBooxx EEnndd WWrreenncchheess::
7/16, 1/2, 9/16, 5/8, 11/16
SSoocckkeett WWrreenncchheess::
(1/2” drive preferred)
7/16, 1/2, 9/16, 5/8, 11/16
19mm, 24mm
Ratchet
2 Extensions (6” maximum)
Torque Wrench (0-150 ft-lbs.)
HHeexx SSoocckkeett KKeeyyss ((AAlllleenn wwrreenncchheess::
5/16 (0.156) socket type preferred,
M6, M8, M10 socket type preferred
MMiisscceellllaanneeoouuss:
:
Pliers
Hot Air Gun
“Loctite” Threadlocker 262
“Loctite” Primer T
Copper-loaded grease
(2000A or 3000A circuit breakers only with
sperate phase barriers)
(T&B “Kopr-Shield”)
Table 6 – Recommended Tools
To Next Page
Loading...
