Siemens SICAM 7KG85X - Clearing of Load Profiles

Parameter Default Setting Setting Range
Sync. source Int. clock None
Protocol
Int. clock
Reactive power Q1 Q1
Qn
Qtot
Clearing of Load Profiles
To clear the load profiles in the Maintenance tab, proceed as follows:
•
In the navigation window, click Load profiles.
[sc_clear_load_profiles, 1, en_US]
Figure 5-6 Maintenance Tab, Clear Load Profiles
•
Enter the maintenance password (refer to Table 2-4).
•
Click Clear load profiles.
The load profiles are cleared. The Action was successful indication is displayed on the status bar.
5.1.4
Energy Management
5.1 Load Profile
SICAM, SICAM P850/P855 7KG85X, Manual 107
E50417-H1040-C482-A9, Edition 03.2022