Siemens SICAM 7KG85X - Evaluation Via Display; Clearing of Frequency Events; Voltage-Unbalance Events; Configuration and Value View Via Web Pages

Parameter Default Setting Setting Range
End time Current date/time You can edit the text box directly or
select the end time from the
calendar.
Measurement output Table Table
Evaluation via Display
Refer to 6.4.2.3 Value View via Display.
This submenu lists some frequency events.
Clearing of Frequency Events
Refer to chapter 6.4.5 Clearing of Events.
Voltage-Unbalance Events
Configuration and Value View via Web Pages
Configuring the Voltage-Unbalance Events
[sc_Param unbal events, 1, en_US]
Figure 6-18 Configuration Tab, Voltage Unbalance Events
To change the voltage unbalance event setting in the Configuration tab, proceed as follows:
•
In the navigation window, click Event records.
Table 6-12
Settings for Voltage-Unbalance Events
Parameter Default Setting Setting Range
Voltage unbalance threshold 5 % 1 % to 5 %, increments of 1 %
•
After the parameterization, click Send.
•
In the navigation window, click Activation and cancel.
•
Enter the activation password (refer to Table 2-3).
•
Click Activation.
Value View of the Voltage-Unbalance Events
To display the voltage-unbalance events in the Value view tab, proceed as follows:
•
In the navigation window, click Events.
•
Configure the respective parameters in the list boxes according to the following table.
6.4.3.2
6.4.3.3
6.4.4
6.4.4.1
Power Quality
6.4 Event Records
SICAM, SICAM P850/P855 7KG85X, Manual 131
E50417-H1040-C482-A9, Edition 03.2022