Siemens SICAM 7KG85X - Evaluation Via Display; Clearing of Voltage-Unbalance Events; Clearing of Events

Table 6-13 Settings for Viewing the Voltage-Unbalance Events
Parameter Default Setting Setting Range
Event record type Voltage unbalance event Voltage event
Frequency event
Voltage unbalance event
Start time Current date/time Any with calendar function Time
format:
depends on date/time format
config.
End time Current date/time
Measurement output Table Table
•
Click Display.
The detailed results are displayed in a Find result table. In multi-paged tables, you can navigate forward
and back in the pages using the >> and << buttons.
Evaluation via Display
Refer to 6.4.2.3 Value View via Display.
This submenu lists some voltage unbalance events.
Clearing of Voltage-Unbalance Events
Refer to chapter 6.4.5 Clearing of Events.
Clearing of Events
You can clear the following PQ events respectively:
•
Voltage event
•
Frequency event
•
Voltage unbalance event
Clearing the Events
To clear the PQ events in the Maintenance tab proceed as follows:
•
In the navigation window, click Events.
6.4.4.2
6.4.4.3
6.4.5
Power Quality
6.4 Event Records
132 SICAM, SICAM P850/P855 7KG85X, Manual
E50417-H1040-C482-A9, Edition 03.2022