Siemens SICAM 7KG85X - Configuration and Value View Via Web

For more information on the Configuration, refer to the chapter 6.5.2 Configuration and Value View via Web
Pages.
Configuration and Value View via Web Pages
Configuration of the Waveform Records
To configure the settings of the waveform records in the Configuration tab, proceed as follows:
•
In the navigation window, click Waveform records.
[sc_config_waveform_records, 1, en_US]
Figure 6-21
Configuration Tab, Waveform Records
•
Configure the respective parameters according to the following table.
Table 6-16
Settings for the Waveform Records
Parameter Default Setting Setting Range
Voltage trigger limits
Trigger active Voltage event No
User-defined
Voltage event
6.5.2
Power Quality
6.5 Waveform Records
136 SICAM, SICAM P850/P855 7KG85X, Manual
E50417-H1040-C482-A9, Edition 03.2022