Siemens SICAM 7KG85X - Page 147

Value View of the Trend Records
To display the trend records in the Value view tab, proceed as follows:
•
In the navigation window, click Records.
•
Configure the respective parameters according to the following table.
Table 6-22 Settings for Viewing the Trend Records
Parameter Default Setting Setting Range
Record type Measurement records Trend records
Measurement records
Trend Records
Query method
(only for trend records query)
By time By time
By event
By time
- Start time Current time Any with calendar function Time format:
depends on date/time format config.
- End time Not settable
1 h after Start time
By event
- Event list Selection of a displayed event
Measurement Source Voltage Voltage
Measurements Va Va, Vb, Vc, Vab, Vbc, Vca
Measurement output Table Table
Diagram
•
Select one of the following Measurement output options:
– Table
If you select Table, click Display.
The determined results are displayed in a table. In the multi-page tables, you can show the forward
and backward pages with the >> and << buttons. If you want to view a certain page, enter the page
number at the bottom and click show.
– Diagram
If you select Diagram, click Display.
Power Quality
6.7 Trend Records
146 SICAM, SICAM P850/P855 7KG85X, Manual
E50417-H1040-C482-A9, Edition 03.2022