•
Enter the activation password (refer to Table 2-3).
•
Click Activation.
Configuration of the User-Defined Screen
In the User-defined screen dialog, you can parameterize up to 4 different User screens. Each screen type
allows you to select whether to display the measured values numerically (2 or 4 measured values) or graphi-
cally and numerically (2 or 3 measured values). To select which of the 4 screens are presently displayed on the
device, use the device softkeys and the Web browser.
To configure the User-defined screen values in the Configuration tab, proceed as follows:
•
In the navigation window, click User-defined screen.
[sc_user-defined_configuration, 2, en_US]
Figure 7-2 Configuration Tab, User-Defined Screen
•
Configure the respective parameters according to the following table.
Table 7-2
Settings for User-Defined Screen
Parameter Default Setting Setting Range
Screen type
None
17
None
2 measured values, numerical
4 measured values, numerical
2 measured values, graphical + numer-
ical
3 measured values, graphical + numer-
ical
Screen name USER_SCREEN_x
(x = 1 to 4)
You can update and edit it directly.
Max. 18 characters
Only English and German letters,
numbers, and special characters are
permitted.
17
If you have not made any selection, the displays explained in the following do not exist.
Display and Other Functions
7.1 Display and Display Settings
SICAM, SICAM P850/P855 7KG85X, Manual 155
E50417-H1040-C482-A9, Edition 03.2022
To Next Page
Loading...
