Siemens SICAM 7KG85X - Page 157

Parameter Default Setting Setting Range
2 measured values, numerical:
•
Display 1, numerical
•
Display 2, numerical
-not assigned- The selection of measured values
depends on the network type.
Designation can be changed during
the parameterization.
4 measured values, numerical:
•
Display 1, numerical
•
Display 2, numerical
•
Display 3, numerical
•
Display 4, numerical
-not assigned-
2 measured values, graphical, and numer-
ical:
•
Display 1, graph./num.
•
Display 2, graph./num.
-not assigned-
3 measured values, graphical, and numer-
ical:
•
Display 1, graph./num.
•
Display 2, graph./num.
•
Display 3, graph./num.
-not assigned-
Display x, graph./num. (x = 1 to 3)
•
Min value
•
Max value
Unit according to meas-
ured value
1.0
10.0
The selected parameters are used to
define the minimum and maximum
values.
•
After the parameterization, click Send.
•
In the navigation window, click Activation and cancel.
•
Enter the activation password (refer to Table 2-3).
•
Click Activation.
Display and Other Functions
7.1 Display and Display Settings
156 SICAM, SICAM P850/P855 7KG85X, Manual
E50417-H1040-C482-A9, Edition 03.2022