[sc_q100_Firmware_processing_upload_successful, 1, en_US]
Figure 8-4 Firmware-Upload Indication When Loading a .cms File
After approximately 2 min, the device restarts automatically and the Log on tab appears for reconnection with
the device.
Device firmware, default set of parameters, text libraries, HTML files, or parts thereof are uploaded.
You can find the upload file in the download area in the Siemens Internet under: https://
support.industry.siemens.com/cs/document/109743621/?en-US and https://support.industry.siemens.com/cs/
document/109743594/?en-US. To update the firmware to the latest version, select the following upload file:
•
File with extension .cms for update from version V3.00 or later version to the latest version
Abort Firmware Upload
If you do not want to update the firmware, then click Abort in the section Abort firmware upload.
The device will be restarted after 20 s in application mode.
System Functions
8.3 Firmware Upload
186 SICAM, SICAM P850/P855 7KG85X, Manual
E50417-H1040-C482-A9, Edition 03.2022
To Next Page
Loading...
