Siemens SICAM 7KG85X - Meaning of Leds

Meaning of LEDs
LEDs on the Front Side
The device automatically monitors the functions of hardware and software components. The LEDs on the front
side of the housing (see 1.3 Device Design) indicate the current device status.
Table 9-1 Designation of the LEDs on the Front Side
LEDs Meaning
RUN: Device active
ERROR: Indicates an error according to parameterization
H1 to H2: According to parameterization
Depending on the status, the LEDs can be permanently on, flashing, or off. The states are described in chapter
10 Troubleshooting, Repair, and Fallback Mode.
i
i
NOTE
The functions of the LEDs on the display side are the same as the functions of the LEDs on the top of the
housing.
LED at the Ethernet Socket
Depending on the status, the LEDs at the Ethernet socket can be permanently on, flashing, or off. The
meaning of the LEDs is explained in the following table:
Table 9-2
LEDs at the Ethernet Socket
LED Meaning
LED Speed:
•
On: 100 Mbit/s
•
Off: 10 Mbit/s
LED Link/Activity:
•
LED on: Ethernet link is up.
•
LED flashing: Ethernet link is up and data is transferred.
•
LED off: no Ethernet partners is connected.
9.9
Commissioning and First Steps
9.9 Meaning of LEDs
210 SICAM, SICAM P850/P855 7KG85X, Manual
E50417-H1040-C482-A9, Edition 03.2022