Softkey Functions F1 F2 F3 F4
Exiting edit mode
Increasing the displayed value or switching forward in
the parameter list in edit mode
Reducing the displayed value or switching backward in
the parameter list in edit mode
Switchover the sign
Switching between selected and non-selected state (for
example, password protection on → password protec-
tion off)
Table 9-4 Icons in the Title Bar of the Display
Icon Definition
The device is password-protected.
The device password was entered correctly and the device is unlocked.
Starting Operation
Before starting the device, the following preconditions must be met:
•
Mount the device as described in chapter 9.3 Assembly.
•
Connect the lines for measurement, communication and supply voltage as described in the chapters
9.5 Electrical Connection, 9.7 Communication Connections, 9.8 Binary Connections and observe the
safety notes.
•
Switch on the devices needed for the measurement.
•
Switch on the supply voltage of the device.
•
Check whether the LEDs indicate that the device is ready (see chapter 10.1.3 LED Indications).
Once the device is initialized, the currently selected screen with the measured values is displayed.
NOTE
The following figures only show the display without the front view of the device.
9.10.2
Commissioning and First Steps
9.10 Operation via Display
212 SICAM, SICAM P850/P855 7KG85X, Manual
E50417-H1040-C482-A9, Edition 03.2022
To Next Page
Loading...
