[sc_fallback_mode_run_app, 1, en_US]
Figure 10-2
Fallback Mode, Maintenance Tab
Firmware Upload with Secure Factory Reset
If you select a valid firmware package and click Upload, the entire internal non-volatile memory is cleared. As
a result, all the user settings and sensitive data including audit logs are deleted. After the firmware is
uploaded, the device starts with factory default settings. The IP address is changed to the default setting
192.168.0.55.
The progress is shown in the Status information, see the following picture.
Troubleshooting, Repair, and Fallback Mode
10.2 Fallback Mode
SICAM, SICAM P850/P855 7KG85X, Manual 239
E50417-H1040-C482-A9, Edition 03.2022
To Next Page
Loading...
