Siemens SICAM 7KG85X - Safety Standards

Shock
IEC 60068-2-27 test Ea
Half-sine resistance
5 g acceleration, duration 11 ms,
every 3 shocks in both directions of the 3 axes
Seismic Vibration
IEC 60068-3-3 test Fc
Sinusoidal
1 Hz to 8 Hz: ±7.5 mm amplitude (horizontal axis)
1 Hz to 8 Hz: ±3.5 mm amplitude (vertical axis)
8 Hz to 35 Hz: 2 g acceleration (horizontal axis)
8 Hz to 35 Hz: 1 g acceleration (vertical axis)
Frequency sweep 1 octave/min
1 cycle in 3 orthogonal axes
Vibration and Shock Stress during Transport
Standards IEC 60068
Vibration
IEC 60068-2-6 test Fc
Sinusoidal
5 Hz to 8 Hz: ±7.5 mm amplitude;
8 Hz to 150 Hz: 2 g acceleration
Frequency sweep 1 octave/min
20 cycles in 3 orthogonal axes
Shock
IEC 60068-2-27 test Ea
Semi-sinusoidal
15 g acceleration, duration 11 ms,
every 3 shocks (in both directions of the 3 axes)
Continuous Shock
IEC 60068-2-29 test Eb
Half-sine resistance
10 g acceleration, duration 16 ms,
every 1000 shocks (in both directions of the 3 axes)
Free fall
IEC 60068-2-32 test Ed
0.5 m
Safety Standards
Standards: EN 61010
IEC EN 61010-1, IEC EN 61010-2-30
12.2.4
Technical Data
12.2 Test Data
252 SICAM, SICAM P850/P855 7KG85X, Manual
E50417-H1040-C482-A9, Edition 03.2022