Date/Time
Configuration via Web Pages
Setting Date/Time
To change the date/time settings in the Configuration tab, proceed as follows:
•
In the navigation window, click Date and time.
[sc_config_date_and_time_p85x, 1, en_US]
Figure 2-9 Configuration Tab, Date and Time
•
You can either get the date and time from the connected computer or adjust it manually.
Getting the PC Date and Time
•
Click Get PC date and time.
The computer time is displayed in the fields of the window and applied in the device.
Setting the Date and Time Manually (24-hour format)
•
Enter the desired time into the fields Day (format dd), Month (format mm), Year (format yyyy), Hour
(format hh), and Minute (format mm).
•
Enter the password.
•
Click Set Date and time.
The time you have entered is displayed in the fields of the window and applied in the device.
The Action was successful indication is displayed on the status bar.
2.3
2.3.1
Basic Functions
2.3 Date/Time
SICAM, SICAM P850/P855 7KG85X, Manual 39
E50417-H1040-C482-A9, Edition 03.2022
To Next Page
Loading...
