Siemens SICAM 7KG85X - Configuration Via Web

Internal Time Synchronization via RTC
Besides the external time synchronization, the internal time synchronization is also possible using the battery-
buffered RTC (Real-Time Clock). Due to the reduced accuracy, RTC should only be used in case of a failure or of
the unavailability of the external time synchronization.
Configuration via Web Pages
Configuration of the Time Synchronization
To change the time synchronization settings in the Configuration tab, proceed as follows:
•
In the navigation window, click Date and time.
[sc_admin_Time_sync, 2, en_US]
Figure 2-11
Configuration Tab, Time Synchronization
•
Configure the respective parameters according to the following table.
2.4.2
Basic Functions
2.4 Time Synchronization
SICAM, SICAM P850/P855 7KG85X, Manual 43
E50417-H1040-C482-A9, Edition 03.2022