Siemens SICAM 7KG85X - Modbus TCP Server; Configuration Via Web Pages

[dw_p85x_display_communication_ethernet, 1, en_US]
Figure 2-27 Submenu Communication via Ethernet
i
i
NOTE
The MAC address is shown on the display but cannot be edited.
For this purpose, a prompt is displayed which you must acknowledge with Ok.
Modbus TCP Server
Configuration via Web Pages
To change the settings of the Modbus TCP in the Configuration tab, proceed as follows:
•
In the navigation window, click Communication Ethernet.
•
Select Modbus TCP as the Bus protocol.
2.6.2
2.6.2.1
Basic Functions
2.6 Ethernet Communication
SICAM, SICAM P850/P855 7KG85X, Manual 65
E50417-H1040-C482-A9, Edition 03.2022