•
Click Delete log.
All operational indications are deleted without backup. The indication no. 00001 appears in the log list:
Clear Operational Log.
NOTE
If you need the operational indications, for example for subsequent analysis, save or print them out.
Viewing and Clearing of Error Logs
To clear the error logs in the Maintenance tab, proceed as follows:
•
In the navigation window, click Error log.
[sc_clear_error_log, 1, en_US]
Figure 2-40 Maintenance Tab, Clear Error Log
•
Enter the maintenance password (refer to Table 2-4).
•
Click Delete log.
All error logs are deleted without backup. The indication no. 00001 appears in the log list: ***Error Log
Cleared***.
The following error messages are listed:
•
Serial No.
•
Date of registration
•
Time of registration
•
Relative time (referring to the start of operation, output in milliseconds)
•
Task, Code and Location are service information for the manufacturer
•
Description of the error
NOTE
If you need the error messages, for example for subsequent analysis, save or print them out.
Basic Functions
2.8 Message Logs
82 SICAM, SICAM P850/P855 7KG85X, Manual
E50417-H1040-C482-A9, Edition 03.2022
To Next Page
Loading...
