Siemens SICAM 7KG85X - Limits; Function Description; Configuration and Value View Via Web Pages

Limits
Function Description
In the Select automation functions menu, you can set upper or lower limits for up to 16 measured values.
Limit violations of the upper or lower range of values can be output as indications. Limiting-value violations
can be signaled to the device via 2 binary outputs and the LEDs H1 to H2. Furthermore, all 16 limit violations
can be sent to peripheral devices via communication interfaces.
The programmable limits are divided into 2 groups: Limits 1-8 and Limits 9-16. The parameterization is iden-
tical for all limits.
Hysteresis of the Limiting-Value Violation
[dw_hysteresis, 1, en_US]
Figure 4-1 Hysteresis (General Representation)
Configuration and Value View via Web Pages
Configuration of the Limits
To change the limit settings in the Configuration tab, proceed as follows:
•
In the navigation window, click Limits 1-8 or Limits 9-16.
4.1
4.1.1
4.1.2
Automation Functions
4.1 Limits
92 SICAM, SICAM P850/P855 7KG85X, Manual
E50417-H1040-C482-A9, Edition 03.2022