Engineering via SICAM WEB
SICAM RTUs, User Manual SICAM CMIC 161
DC8-001-2.09, Edition 08.2016
You find the meaning and details on the protocol-specific settings in the manual SICAM RTUs
Common Functions Protocol Elements.
After saving the settings a restart request appears.
• Click , if you want to change further parameters
• Click to perform a restart
5.1.7.4 Settings of the Messages
The settings of the messages reside in the directory tree under
SICAM CMIC | Master module | Communication | PRE<0…3> | IEC60870-5-101/104
(the checkbox Show all parameters must be activated).
These settings are independent on the communication type and exist on the master control
element individually for each protocol element:
• Transmission with/without time tag
• Variable elements of the message
• Command time monitoring
• Monitoring ACTCON
Transmission with/without time tag
The information objects supported by SICAM CMIC can be transmitted to the control center
either with time tag or without time tag. The definition happens selectively for each type identi-
fication.
You find the parameters thereto in the subdirectory Transmission with/without time tag.
Variable elements of the message
For the communication with different systems the byte numbers of the identifiers in the mes-
sage header can be parameterized.
The settings on the master control element reside in the subdirectory under Varia-
ble elements of the message.
You find the information thereto in the manual SICAM RTUs Common Functions System and
Basic System Elements, Appendix "Message Formats".
To Next Page
Loading...
