Error Handling
SICAM RTUs, User Manual SICAM CMIC 333
DC8-001-2.09, Edition 08.2016
Characteristic Possible cause Remedy
After loading of a firmware
the loaded firmware revision
does not appear in the con-
figuration page
Firmware code not load-
ed/configured completely due
to communication fault or op-
erating error (e.g. menu was
quitted prematurely)
• Start a new loading process
• Observe progress display
• Loading process is completed cor-
rectly when the indication Upload
successful appears, with hyperlink
to the target device
To Next Page
Loading...
