5
5.8 Additionals
103Power Meter SICAM P 7KG7750/55, Manual
E50417-B1076-C340-A6, Edition 09.2013
parameterization menu from the buttons on the device. The relevant menu is only enabled if you
enter the correct password.
Code 1
• without: no security
• with: device code 1 is only active if code 2 is activated as well.
Functions secured: screen parameterization, reset energy min / max values and changing
device language.
Code 2
• without: no security (code 1 also deactivated)
• with: code is activated
Saved functions: basic parameters (connection / transformers, outputs, interface, change
code, adjustment, other settings)
Notes:
• A password always consists of a 6-digit number.
• If you forget your password, you can activate the machine either using a master password
(available from the hotline, see Foreword) or using the SICAM P parameterization software.
• Device code 1 is only active if code 2 is activated as well.
• If code 1 and 2 are activated, the code 2 password can also be used to unlock all the func-
tions secured using code 1.
• If the secured parameter settings are called up in SICAM P, a window appears asking you to
enter a password.
• If a secured parameter is unlocked by entering a password on the device, a new password
prompt appears after a wait of 1 minute in level 1.
Note
The software does not require a password.
To Next Page
Loading...
