5
5.9 Memory Management
110 Power Meter SICAM P 7KG7750/55, Manual
E50417-B1076-C340-A6, Edition 09.2013
Binary states
Calculation example
with 20 % memory size
5.9.2 Mean Values
In this dialog window you can specify the settings for mean value recording.
Proceed as follows:
1. Select up to eight Measured values and Test points.
2. Select a Date or one of the six Limit value groups as Start selector for the average value
recording. It is possible to combine Date and Limit value group as start selectors. The first of
the two criteria fulfilled, will launch the recording.
3. When entering a date as Start selector, you must indicate a year between 2000 and 2060.
4. The Ring buffer mode allows you to select, if the oldest values will be overwritten (= Yes) or
not (= No) when the capacity of the associated memory area is exhausted.
Byte
ByteemoryAllocatedM
Values
8
][
=
209715 Byte
8 Byte
Values = = 26214
To Next Page
Loading...
