5
5.9 Memory Management
112 Power Meter SICAM P 7KG7750/55, Manual
E50417-B1076-C340-A6, Edition 09.2013
4. The Ring buffer mode allows you to select, if the oldest values will be overwritten (= Yes) or
not (= No) when the capacity of the associated memory area is exhausted.
5. Also, you must indicate the Period time (15 min, 30 min, 60 min).
Note
If you have entered a past start date, SICAM P will initiate mean value recording immediately
after the setting. Manual start is not activated by configuration but can be initiated at any time.
To Next Page
Loading...
