Siemens SICAM P 7KG7750 - Resetting Values in the Device

5
5.11 Resetting Values in the Device
120 Power Meter SICAM P 7KG7750/55, Manual
E50417-B1076-C340-A6, Edition 09.2013
5.11 Resetting Values in the Device
SICAM P Parameterization allows you to reset the following values:
• Energy counter
• Counters for limit violations
• Min, aver and max values
Proceed as follows:
1. Establish a connection to the device. Make sure to set the same parameter values in
SICAM P Parameterization and in the device. In the device, the serial interface must be set
to "PC-RS 485".
2. From the menu bar, select Device → Commands → Reset values to reset the displayed
items.