Siemens SICAM P 7KG7750 - Binary States; Log Entries

5
5.12 Reading the Device Memory
124 Power Meter SICAM P 7KG7750/55, Manual
E50417-B1076-C340-A6, Edition 09.2013
5.12.9 Binary States
Binary states are represented in a chart and in diagrams. For each recorded binary state, one
column in the chart and one diagram is shown.
5.12.10 Log Entries
Log entries are represented in a chart. For each of the following entries, date and time are
shown:
• Failure voltage supply
• Switch on auxiliary power supply
• Change of device parameter
• Reset recording limit value groups
• Reset recording mean values
• Reset recording power values
• Reset recording oscilloscope
• Set watch
Note
For further information on "Reading the Device Memory", refer to the online help of the PC pro-
gramming software (press F1).